Best Budget Car Amplifier in 2023: Reviews and Recommendations

Power - 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms

Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal

Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry

Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers

Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction

Switchable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it

Variable Input Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier

Specs - Dimensions: 9.13” x 10.44” x 2.25”, Weight: 4.43 lbs., Speaker Impedance: 2 to 8 Ohm, THD @ RMS Output: 0.01%, S/N Ratio: 102 dB, Frequency Response: 9 Hz to 50 kHz, Fuse Quantity: 1 30 Amp ATO Blade

Warranty - BOSS Audio Systems provides a 6 Year Platinum Online Dealer Warranty for purchases through Amazon.Com. We strongly encourage professional installation of this product to ensure proper functionality

Power - 100 Watts Max X 4 @2-Ohms, 50 Watts Max X 4 @4-Ohms

Class A/B Topology - Class ‘A’ Amplifiers Have Enormous Amount Of Current Flowing Through Its Output Transistors With No Audio Signal. Class ‘B’ Amplifiers Have No Current Flowing Through Its Outputs With No Audio Signal

Full Range - With A Full Range Amplifier You Not Only Have The Option To Run Your Speakers, But Also Your Subwoofers

Variable Gain Control - The Gain Control Is Not For Adjusting Volume. It Simply Adjusts The Amount Of Signal That Is Coming From Your Receiver And Going To Your Amplifier

POWER: Maximum Power output of 200 Watts at 2 Ohms into two channels. Maximum power output of 100 Watts at 4 Ohms into two channels

HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the R1002 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs

LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the R1002 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers

VARIABLE INPUT GAIN CONTROL: The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

WARRANTY: BOSS Audio Systems provides a Powerful 6 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon Dot Com

BLUETOOTH COMPATIBLE: Built-in Bluetooth wireless music streaming ability works with all of today’s latest devices including smartphones, tablets, laptops and computers. Hassle-free receiver pairing allow you to stream wireless audio instantly

SAFETY CONSCIOUS POWER SWITCH: When the power amp is turned on, there is a three-second delay, which reduces/eliminates the turn-on transients associated with the system equipment connected to the amplifier and protects loudspeakers

POWER LED: Built-in power LED indicators illuminate when the AC main power is being supplied to the amp and both channels are operational

SHOCKPROOF BINDING POSTS: Shockproof binding posts are provided. For each channel, the outputs are in parallel and the speaker connection cables can be terminated with banana plugs or stripped wires

AUTOMATIC COOLING FANS: Two 2-speed DC fans supply cool air to the amplifier. The fans switch to high speed automatically when the unit requires additional cooling

Power - 3000 Watts Max x 1 @1-Ohm, 1500 Watts Max x 1 @2-Ohms

Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry

1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to

Strapping Capable - You are able to strap TWO PL3000.1D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power

Variable Subsonic Filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion

Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction

Variable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it

Specs - Dimensions: 11.9” x 7” x 2.3”, Weight 6.7 lbs.

Power - 500 Watts Max x 2 @2-Ohms, 250 Watts Max x 2 @4-Ohms, 1000 Watts Max x 1 Bridged @4 Ohms

Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers

Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal

Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry

Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier

Variable Bass Boost - With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)

Bridgeable - Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels

Specs - Dimensions: 9. 5” x 10. 31” x 2. 25”, Weight: 6. 62 lbs.

- BOSS Audio Systems provides a powerful 6 year Platinum Online Dealer so long as the purchase is made through . We strongly encourage professional installation of this product to ensure proper and safe functionality

Blaupunkt AMP1604 4-Channel, Full-Range Amplifier Max. Output Power: 1600W

POWERFUL SOUND SYSTEM: 4 channel full-range class A/B amplifier is ideal for all vehicles, especially smaller models, with a slim design fitting almost anywhere; Dimensions (L x W x H): 12.25 x 7 x 2.3 inches

2 OHM STABLE: 2 ohms stable amplifier produces more power resulting in more volume

BRIDGEBALE: Brigebale amplifier allows you to combine channels of a multi-channel amplifier to get more power or flexibility out of it

CLASS A/B AMPLIFIER: Class A/B amplifiers have the ability to produce great quality sound while performing great efficiency; High-level and low-level inputs provide flexibility by allowing you to build an audio system

VARIABLE CONTROLS: Variable bass boost allows you to adjust the low bass within the boost range that fit your needs; Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer